Motion Factory Racing
Flex-Mount footpegs (#KLR) FITS: KLR650, Honda CRF. Pit bikes
Flex-Mount footpegs (#KLR) FITS: KLR650, Honda CRF. Pit bikes
Couldn't load pickup availability
Footpegs come fully assembled:
-All mounts use the manufacturer's OEM springs and pins.
-Chromoly steel spindles with reusable thread locker. 14mm wrench. Torque spec 35 ft/lbs
-3 bushing sets rated 80A, A90, A95. The A90 comes installed on the pegs.
*IMPORTANT* If you are ever installing the platforms onto the spindle the nylon locking nut torque spec is 2 ft/lbs (hand tight) Once you feel it bottom out stop tightening and visually inspect to make sure the nylon in the nut has engaged with the last couple of threads on the spindle. Over-torquing/tightening will cause the threads to strip and fail.
*The steel spindle and bushing bolt are 12.9 rated and tested hardware. Steel has excellent fatigue strength when it comes to getting bent. Footpegs tend to take the most abuse out of all the components. We designed our hardware to bend rather than break in a significant impact. A wrench or adjustable wrench will quickly and easily bend the bolt back straight. Please avoid using a hammer. A little leverage from a long-handled wrench or pipe will do the job.
Fitment:
KAWASAKI KLR650 2022-2023
KAWASAKI KLR650 Adventure 2022-2023
KAWASAKI KLR650 Traveler 2022-2023
1. They fit most Chinese 50cc 70cc 110cc, 125cc 150cc four strokes pit bike/ dirt bikes Brand as Orion, X Extreme, BSE, TATAO, Appolo, SUNL Etc
2. They can be modified to fit Honda XR50 XR70 CRF50F CRF70F CRF80F CRF100F Etc.
3. They Fit Kawasaki KLX110, Yamaha PW50 PW80, TW200, TT-R50E, TT-R90E. Some of these bikes may need a little modification by yourself, Please check the size carefully before you buy. If you make mods to the footpegs for fitments it will void all warranties and return policies.








